PFSP 1kV 2x4/4

Country ref. 1067036
GTIN 7045210007671

Eca

See all PFSP 1kV with copper conductor (2x1,5 - 3x6 mm²) products
Description
Standards
International : EN 50265; HD 603.3J; IEC 60332-1-2Declaration of Performance : Reaction to fire: Eca
according to EN50575:2014+A1:2016
Description
Recommended for indoor and outdoor use in all areas, and can be installed directly in the ground without extra protection. PFSP 1kV is suitable for all low voltage systems i.e 230V, 400V and 690V.
The combined screen of copper conductor + longitudinal aluminium sheath is dimensioned to fulfill the requirements for earth conductor (PE). If the cable is cut outdoor, any end(s) must be sealed if not connected/terminated. This to prevent water intrusion, and possible corrosion in the future.
Min. installation temperature without extra precautions: 0 °C
Characteristics
Construction characteristics | |
---|---|
With Green/Yellow core | No |
Conductor flexibility | Solid class 1 |
Material of bedding | Extruded compound |
With smaller neutral conductor | No |
Sheath colour | Grey |
Type of conductor | Circular, solid |
Conductor material | Bare copper |
Core identification | Colours |
Insulation | PVC |
Lead free | Yes |
Screen | Longitudinal aluminium tape + copper wire |
Outer sheath | PVC |
Dimensional characteristics | |
Screen section | 4mm² |
Conductor diameter | 2.2mm |
Nominal outer diameter | 12.2mm |
Number of cores | 2 |
Conductor cross-section | 4mm² |
Approximate weight | 25.3kg/100m |
Approximate weight | 253kg/km |
Electrical characteristics | |
Rated Voltage Uo/U (Um) | 0.6/1 kV |
Mechanical characteristics | |
Cable flexibility | Rigid |
Usage characteristics | |
Bending factor when laying | 8(xD) |
Flame retardant | Yes |
Maximum operating temperature | 70°C |
RoHS compliant | Yes |