IFSI 1kV 3x25A/10
Country ref. 1067224
StandardsInternational : HD 603 S1/3L
National : NEK HD 604-5D
AXQJ is a halogen free, XLPE-insulated, HFFR-sheathed cable with circular, stranded aluminium conductors. The cable has a screen of annealed copper wires with opposite open helix of copper. AXQJ is designed according to HD 603. The conductors have resistance and number of wires according to IEC 60228 class 2. The cores are identified by colours according to HD 308. The sheath is marked type/manufacturer/year+month/metre marking. AXQJ meets the requirements for flammability class Dcas2d2a2 according CPR. The cable is certified by Intertek SEMKO.
AXQJ is manufactured and tested according to HD 603 3-L in applicable parts. The cable can be loaded in accordance with national regulations on electrical installations.
Approved by Intertek SEMKO.
Designed, manufactured and tested in accordance with ISO 9001.
Environmental management system
The activities at our plant in Grimsås are certified to ISO 14001.
Lifemark(TM) recycling marking
The external surface of the outer sheath is embossed with a text which specifies all components in the polymers and prepares the cable for future recycling.
|Outer sheath||HFFR (polyolefin)|
|With Green/Yellow core||No|
|With smaller neutral conductor||No|
|Number of cores||3|
|Average insulation thickness||1.0mm|
|Average sheath thickness||1.8mm|
|Nominal outer diameter||24.0mm|
|Max. DC resistance of the conductor at 20°C||1.2Ohm/km|
|Resistance of the screen||2.0Ohm/km|
|Rated Voltage Uo/U (Um)||0.6/1 kV|
|Minimum installation temperature||-10°C|
|Recommended minimum installation temperature||0°C|
|Maximum operating temperature||90°C|
|Short-circuit max. conductor temperature||250°C|
|Smoke density||IEC 61034|
|U.V resistance||Very good|
|Minimum operating temperature||-40°C|
|Bending factor when installed||8(xD)|
|Bending factor when laying||12(xD)|