FXQJ EMC 1 kV 3x240/120
Country ref. 1067350
StandardsInternational : HD 604.5D
National : NEK HD 604-5D; NEK IEC 60754-1; NEK IEC 60754-2 ; NEK IEC 61034; SS 424 14 18
Declaration of Performance : Reaction to fire: Dca-s2,d2,a2
according to EN50575:2014+A1:2016
FXQJMCMK HF EMC is a halogen free, XLPE-insulated, HFFR-sheathed cable with circular, stranded copper conductors for cross-sections up to 35 mm2. Other cross-sections have sector shaped, stranded copper conductors. The outer sheath is UV-protected. FXQJ/MCMK HF EMC is designed according to HD 603. The cable has a screen of annealed copper wires with opposite overlapping helix of copper tape. The copper screen has an optical coverage of 100 % and fullfil the EMC directive when it is correct installed. The conductors have resistance and number of wires according to IEC 60228 class 2. The cores are identified by colours according to HD 308. The sheath is marked type/manufacturer/year+month/metre marking. FXQJ/MCMK HF EMC meets the requirements for flammability according IEC 60332-3 category B (F4B). The cable is certified by SEMKO.
Lifemark(TM) recycling marking
The external surface of the outer sheath is embossed with a text which specifies all components in the polymers and prepares the cable for future recycling.
FXQJ/MCMK HF EMC is manufactured and tested according to HD 603-3L in applicable parts. The cable can be loaded according to SS 424 14 24.
Approved by SEMKO.
Designed, manufactured and tested in accordance with ISO 9001.
Environmental management system
The activities at our plant in Grimsås are certified to ISO 14001.
|Conductor material||Bare copper|
|Outer sheath||HFFR (polyolefin)|
|With Green/Yellow core||No|
|With smaller neutral conductor||No|
|Number of cores||3|
|Average insulation thickness||1.7mm|
|Average sheath thickness||2.8mm|
|Nominal outer diameter||52.0mm|
|Max. DC resistance of the conductor at 20°C||0.0754Ohm/km|
|Resistance of the screen||0.15Ohm/km|
|Rated Voltage Uo/U (Um)||0.6/1 kV|
|Minimum installation temperature||-10°C|
|Recommended minimum installation temperature||0°C|
|Maximum operating temperature||90°C|
|Short-circuit max. conductor temperature||250°C|
|Electro magnetic interference resistance|
|Smoke density||IEC 61034|
|Gases corrosivity||IEC 60754-2|
|Minimum operating temperature||-40°C|
|Bending factor when installed||8(xD)|
|Bending factor when laying||12(xD)|