Country ref. 1067517
StandardsInternational : IEC 60332-1; IEC 60754-2; IEC 61034-2
Declaration of Performance : Reaction to fire: Dca-s2,d2,a2
according to EN50575:2014+A1:2016
The cable consists of plain, annealed copper conductors bundled in twisted pairs. Cables with more than 10 pairs have sub-units of 10 pairs.
The cable has a conductor insulation of halogenfree, flame retardant polymer (PPO). The cable core is wrapped with polyester tape and screened with one layer of aluminium/polyester tape. The cable is unfilled and has a ripcord underneath the cable sheath. The outer sheath is a cream white halogen-free, flame retardant polymer, which does not adhere to the screen.
Information on electrical data, as well as cable core design and identification, is attached in Related Information.
|Type of conductor||Circular, solid|
|Insulation||Halogen free thermoplastic material|
|Screen||Aluminium-Polyester tape + tinned copper drain wire|
|Outer sheath||HFFR (polyolefin)|
|Number of pairs||10|
|Nominal outer diameter||7.2mm|
|Minimum breaking load||1kN|
|Maximum pulling force by laying||0.5kN|
|Maximum tensile load during service (Tl)||20.0daN|
|Minimum static operating bending radius||36mm|
|Operating temperature, range||-40 .. 60°C|
|Ambient installation temperature, range||-15 .. 40°C|
|Storage temperature, range||-40 .. 70°C|