LANmark-OF Tight Buffer Universal 24x Multimode 50/125 OM3 LSZH Dca s1d0a1 Aqua
StandardsInternational : ISO/IEC 11801
Declaration of Performance : Reaction to fire: Dca-s1,d0,a1
according to EN50575:2014+A1:2016
Description and Application
The LANmark-OF Tight Buffer Universal cable is a fibre cable that can be used indoor and outdoor in a duct.
It complies with the indoor fire requirements and can be installed indoor both vertically and horizontally.
The LANmark-OF Tight Buffer Universal can also be used for outdoor installation in a duct: the water tight glass yarns make the cables fully waterproof and rodent retardant.
The LANmark-OF Tight Buffer Universal cable has 900 um buffered fibres. This second coating till 900 um provides additional protection of the fibres and facilitates the handling when terminating the fibres in a patch panel. The easy strip tight buffer design allows stripping the fibre over 10 cm in one action.
The LANmark-OF Tight Buffer Universal is most suitable for direct termination by either anaerobic or hot melt connectors. The tight buffered fibres can also be terminated with splicing of pigtails.
Tight buffer cables are available in Aqua for OM3 and OM4 and Yellow for singlemode. High exposure to UV radiation and sunlight could lead to fading of the Aqua and Yellow jacket, but the mechanical integrity of the cable jacket will be maintained.
Legend accompanying the cross section drawing:
- LSZH outer sheath with UV resistant additive
- Watertight glass yarns
- Optical fibres (900 um)
- Central strength element
- Designed for direct termination and splicing
- Dielectric design
- Indoor cable for horizontal and vertical installations
- Fire performance compliant with IEC 60332-1, IEC 60332-3, NFC 32070 C2, and NFC 32070 C1
- Outdoor cable for installation in a duct
- Fully waterproof
- Rodent retardant
- UV resistant
- Available in SM, OM3 and OM4
- Available in 2-24 fibres
|Fiber optic type||OM3 50/125|
|Number of optical fibres||24|
|Nominal outer diameter||7.8mm|
|Maximum pulling force (IEC 60794-1-2-E1)||1500N|
|Maximum operating pulling force||450N|
|Crush resistance (IEC 60794-1-E3)||100N/cm|
|Mechanical resistance to impacts||10 impacts of 3 N.m|
|Flame retardant||IEC 60332-1|
|Fire retardant||IEC 60332-3|
|Gases corrosivity||IEC 60754-1, IEC 60754-2|
|Minimum static operating bending radius||80mm|
|Minimum dynamic operating bending radius||120.0mm|
|Ambient installation temperature, range||0 .. 40°C|
|Operating temperature, range||-40 .. 70°C|
|Storage temperature, range||-40 .. 70°C|
|Gases toxicity||IEC 61034|