Country ref. 1083281
StandardsInternational : IEC 60708; IEC 61156
The cable consists of plain, annealed copper conductors with foamed polyethylene (PE) insulation (cables with 2 pairs have solid PE insulation). The cable core is filled with petroleum jelly and wrapped with polyester tape. The inner sheath material is PE.
The cable is armoured with one layer of galvanized steel wires and has an outer sheath of black PE.
Information on electrical data, as well as cable core design and identification, is attached below.
|Type of conductor||Circular, solid|
|Material used for longitudinal water tightness||Grease|
|Armour type||Steel wires|
|Number of pairs||100|
|Nominal outer diameter||45.1mm|
|Minimum breaking load||82kN|
|Maximum pulling force by laying||49kN|
|Maximum tensile load during service (Tl)||2400.0daN|
|Minimum static operating bending radius||375mm|
|Operating temperature, range||-40 .. 60°C|
|Ambient installation temperature, range||-15 .. 40°C|
|Storage temperature, range||-40 .. 70°C|