Country ref. 1083330
StandardsInternational : IEC 60708; IEC 61156
The cable consists of plain, annealed copper conductors with foamed polyethylene (PE) insulation. The cable core is filled with petroleum jelly and wrapped with PE tape. A copper tape and tinned copper wire provide a screen.
The cable has a figure-of-8 design, with a black PE sheath over the suspension wire and the cable core.
Information on electrical data, as well as cable core design and identification, is attached in Related Information.
|Type of conductor||Circular, solid|
|Material used for longitudinal water tightness||Jelly|
|Screen||Copper wire + copper tape|
|Suspension wire||Stranded steel wires|
|Number of pairs||5|
|Nominal outer diameter||12.3mm|
|Minimum breaking load||16kN|
|Maximum pulling force by laying||10kN|
|Maximum tensile load during service||1000.0daN|
|Minimum static operating bending radius||65mm|
|Operating temperature, range||-40 .. 60°C|
|Ambient installation temperature, range||-15 .. 40°C|
|Storage temperature, range||-40 .. 70°C|
Docs and info