QXWE W 0,7 Loose tube Optical Fibre Cable - Aerial cable
Type QXWE is a loose tube fibre optical cable. The cable type is intended for use in regional and urban networks for aerial installations.
StandardsInternational : EN 187000; EN 187100; EN 187102; EN 188000; EN 188100; IEC 60793; IEC 60794; ITU-T Rec. G.650; ITU-T Rec. G.652
The cable type is intended for outdoor use in aerial installations. The design can incorporate 2 to 12 fibres in loose tube construction. The tubes is longitudinal water-blocked through the use of polymeric filling compond. The cable core and the suspension strand are sheathed together with halogen-free black polyethylene in a figure eight section.
|Fiber optic type||SM (G.652D)|
|Construction type||Loose tube, SZ|
|Material used for longitudinal water tightness||Swellable yarn|
|Suspension wire||Stranded steel wires|
|Number of optical fibres, range||2 .. 12|
|Total number of wires||7|
|Diameter over suspension strand||4.3mm|
|Maximum pulling force by laying||3kN|
|Maximum permanent tensile load||2.5kN|
|Impact resistance (EN 187 000)||15J|
|Installation type||Aerial Cable|
|Operating temperature, range||-40 .. 70°C|
|Ambient installation temperature, range||-15 .. 60°C|
|Storage temperature, range||-40 .. 70°C|
|See all products|
Products and services
Docs and info
The cable is delivered on wooden recyclable drums in lengths according to arrangement. The drum is marked with the cable type, length, rolling direction and installation information. Cable ends closed with end cap.