PFSP 500 V control cable
Screened control cable for indoor and outdoor use. Suitable for installations where small cross sections and flexible conductors are needed. May be installed directly in ground.
StandardsInternational : IEC 60332-1-2
National : NEK HD 627-4B1
Conductor twisting: The cable is assembled by four conductors twisted into quads. One quad consists of two pairs. The insulation is white with coloured numbers. The numbers are diagonally laid-up in the quad.
Quad assembled cores are specially suitable for electronic control installations due to small mutual influence between the different circuits.
Concentric conductor (screen): For 4x0.75 mm² type, braided copper wires, for other variants concentric copper wires.
Marking on the outer sheath: Metermarking, Cabletype, voltage, No. of conductors and cross section.
Min. installation temperature without extra precautions: 0 °C
If the cable is cut outdoor, any end(s) must be sealed if not connected/terminated. This to prevent water intrusion, and possible corrosion in the future.
The cable meets fire class Eca according to CPR
The cable is marked with LIFEMARK™.
|Conductor flexibility||Flexible class 5|
|Conductor material||Bare annealed copper stranded|
|Average insulation thickness||0.6mm|
|Nominal resistance of the conductor||26.00Ohm/km|
|Max. conductor temperature in service||70°C|
|See all products|
Products and services
Declaration of Performance
Declaration of Performance No: 1000267-SEGR
- Certification Date: 23/02/2018
- AVCP (Assessment and Verification of Constancy of Performance): System 3
- Notified body : 0366
- Declared performance: Reaction to fire Eca according to EN50575:2014+A1:2016
|Nexans ref.||Country ref.||Product Name|
|10021969||1060600||PFSP 4x0,75 mm²|
|10021970||1060601||PFSP 8x0,75 mm²|
|10021971||1060602||PFSP 12x0,75 mm²|
|10021972||1060603||PFSP 20x0,75 mm²|
|10021973||1060604||PFSP 28x0,75 mm²|