Mechanical closure / WTC2

Description
- 6 cable ports
- Re-enterable, fully mechanical watertight system
- IP68 and pressurizable
- Capacity: 6 splice trays or 2 FiberArt modules
- Multi-cable sealing system (up to 12 cables per port)
- Standard, Butt or Straight Mid-span configuration
Description
- 6 cable ports
- Re-enterable, fully mechanical watertight system
- IP68 and pressurizable
- Capacity: 6 splice trays or 2 FiberArt modules
- Multi-cable sealing system (up to 12 cables per port)
- Standard, Butt or Straight Mid-span configuration
Standards
International : Nexans specificationNational : CSE C 69-31; CSE C 69-32; FT/FTRD/7095; FT/FTRD/7097
Description
The LINX WTC Splice case product range is designed for enclosing buried, underground, and overhead cable splices.
Main functions
- To protect splices and bare fibers from the environment and unwanted handlers
- to efficiently and easily store, manage and identify FO splices and fibers.
Docs and info
-
Product usage
Sealing system
- Fully mechanical sealing system for reduced installation and re-entry time.
The top shell, sealed with a gasket, can be easily installed and removed without special tools or torque control. - Cable sealing devices based on a mechanical
compression system: this allows to re-use all
components for future upgrades or re-access to the closure. (No tape, glue, heat-shrink tubes, or cable jacket preparation is needed).
The mechanical sealing system perfectly fits Cables blowing technology.
Grounding
Standard grounding assures electrical continuity between all cable ports (individual cable grounding is also available).
Cable clamping
3 points cable clamps for extremely high cable retention, or simplified 1 point clamping systems are available.
Fibre management
Several fibre management configurations are available for loose tube, tight buffer or ribbon cable:
- Standard splice trays
- FiberArt
Cabling configuration
- Standard
- Butt Mid-Span
- Straight Mid-span
WTC2 équipé de
cassette standardWTC2 avec 2 FiberArt
(144 épissures)WTC2 brassage Caracteristics
Material Reinforced thermoplastic closure Maximum Splice capacity - Up to 288 Heat-shrink splice protections, organized in 6 splice trays
(336 H/S splices in 7 splice trays using a special reversed tray organize - Up to 144 H/S splices organized in 12 splice trays (2 FiberArt modules)
- 96 splices (into 2 trays) and up to 96 Small Form Factors connectors
Cable ports See the Sealing product range datasheet for the number and diameter of cable Cabling configurations - Straight splicing
- Butt mid-span
- Straight mid-span
Sealing system Top shell: mechanical sealing (14 screws – no torque control)
Cable ports: mechanical sealing (elastomer compression system)Spice supports Heat-shrink, ANT, ATI, Focs, 3M, and mass splice protections Dimensions L: 500 mm ; L: 262 mm ; H: 179 mm - Fully mechanical sealing system for reduced installation and re-entry time.