StandardsInternational : EN 50265; HD 627.4 B1; IEC 60332-1
Screened control cable for indoor and outdoor use. Suitable for installations where small cross sections and flexible conductors are needed. May be installed directly in ground.
Quad assembled cores are specially suitable for electronic control installations due to small mutual influence between the different circuits.
Conductor twisting: The cable is assembled by four conductors twisted into quads. One quad consists of two pairs. The insulation is white with black numbers. The numbers are diagonally laid-up in the quad.
Concentric conductor (screen): For 4x0.75 mm² type, braided copper wires, for other variants concentric copper wires.
Marking on the outer sheath: Metermarking, Cabletype, voltage, No. of conductors and cross section.
Min. installation temperature without extra precautions: 0 °C
If the cable is cut outdoor, any end(s) must be sealed if not connected/terminated. This to prevent water intrusion, and possible corrosion in the future.
|Conductor material||Bare annealed copper stranded|
|Conductor flexibility||Flexible class 5|
|Average insulation thickness||0.6mm|
|Max. conductor temperature in service||70°C|
|Flame retardant||IEC 60332-1|
|See all products|