StandardsInternational : EN 50265; IEC 60332-1; IEC 60800
The XTREME heating cable units are ideal for comfort heating in concrete floor constructions, and especially where water/moisture may be present.
These units have cold leads in both ends of the cable, and each unit has two unique factory made integrated splices which are marked =>SPLICE<= on the cable surface. Thus these cables do not have any weak parts which would be installed in the floor, and all connections on the cable should be made outside the floor, i.e. in a junction box or similar.
The cold leads are marked with ****** on the outer sheath.
The length of each cold lead is approx. 2.3m.
Minimum installation temperature (without any precautions) 0 °C.
Mechanical class: M2
|Type of conductor||Solid, Class 1|
|Drain wire||Bare copper|
|Bending factor when laying||5(xD)|
|Flame retardant||IEC 60332-1|
|See all products|
Products and services
Docs and info
Declaration of Performance
Declaration of Performance No: 1000061-NOLA
- Certification Date: 23/01/2017
- AVCP (Assessment and Verification of Constancy of Performance): System 3
- Notified body : 0402
- Declared performance: Reaction to fire Eca according to EN50575:2014+A1:2016
|Nexans ref.||Country ref.||Product Name|
|10118074||1036541||XTREME 300/17 YELLOW|
|10118075||1036542||XTREME 400/17 YELLOW|
|10118076||1036543||XTREME 500/17 YELLOW|
|10118077||1036544||XTREME 600/17 YELLOW|
|10118079||1036545||XTREME 700/17 YELLOW|
|10118080||1036546||XTREME 840/17 YELLOW|
|10118081||1036547||XTREME 1000/17 YELLOW|